VOOPOO PNP REPLACEMENT COILS

The PNP coils by VooPoo have been designed for use with the VooPoo Drag Baby Trio kit and compatible with the Vinci Pod Kit, Vinci Air Pod Kit and the Vinci X Pod kit. There are three versions of this coil which have been designed for mouth to lung vaping and direct to lung vaping.

The 1.2 Ohm PNP C1 coils feature a ceramic coil build, ceramics offer clearer flavour from liquid even at relatively low wattages and produce a discreet amount of cloud. Recommended for mouth to lung vaping. With this coil, we recommend using high PG e-liquids.

The 0.8 Ohm PNP R1 coils feature a dual coil build, producing slightly more cloud than the C1 but still designed for mouth to lung vaping. With this coil, we recommend using high PG e-liquids.

The 1.0 Ohm PNP R2 coils have the same dual coil build as the R1 but with more resistance allowing for a deeper mouth to lung vaping experience. These coils can be used with the Find Trio Kit / Vinci Kit / Vinci R Kit and the Vinci X Kit.

The 0.45 PNP M1 coil can be used between 28 – 35W and has been expressly designed for mouth to lung vaping – producing large amounts of vapour. This coil works best with high VG e-liquids, that are 60% VG or higher.

The 0.6 Ohm PNP M2 coils allow you to use the Drag Trio kit for direct to lung vaping, greatly increasing vapour production. With this coil, we recommend using high VG e-liquids.

0.3 Ohm PNP VM1 coil can be used between 32 – 40W and will create a larger amount of vapour thanks to its mesh coil build – supporting direct to lung vaping. For best results we recommend pairing it with a high VG e-liquid, that’s 60% VG or higher.

The 0.45 Ohm VM3 PNP coils will work best between 25 – 35W and have been designed for restricted Direct To Lung vaping and Mouth To Lung vaping. We recommend using them with either a 50% VG or 60% VG e-liquid.

The 0.6 Ohm VM4 PNP coils support wattage levels of 20 – 25W, for a Mouth To Lung vape. As these are MTL coils they’ll work best with a 50% PG e-liquid.

The 0.2 Ohm VM5 PNP coils will support Direct To Lung vaping and work between 40 – 60W. They should be paired with a high VG e-liquid such as a 70% VG e-liquid.

The 0.15 Ohm VM6 PNP coils low resistance means they can be used for Direct To Lung vaping, working best between 60 – 80W. For best results, we recommend a high VG e-liquid that’s 70% VG or higher.

The 1.2 Ohm TR1 PNP coils have been designed for the V Suit vape kit and support mouth to lung vaping with a 10 – 15W range. We recommend pairing them with a 50% PG e-liquid or high PG e-liquid for best results.

The 0.8 Ohm TM2 PNP coils can be used for mouth to lung vaping at 12 – 18W  Even though they are sub ohm, they will work best with a 50% PG e-liquid. These coils can be combined with the Drag Baby Trio, Drag S, Drag X, Vinci, Vinci X and V Suit kits and more.

PnP-TW15 – 0.15Ω Mesh (55-70w)

PnP-TW20 – 0.2Ω Mesh (40-55w)

PnP-TW30 – 0.3Ω Mesh (28-36w)

Features:

• Mouth to lung or direct to lung vaping
• Multiple coil build types
• Compatible with a range of eliquids
• Plug and pull fitting

Important information about sub ohm vaping:

Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they’ll require more power to use properly, which will be provided by an advanced vape kit.

With these coils larger amounts of vapour will be created, to support this we recommend you use e-liquids that are 60% VG or higher. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength.